narrow front, gas, 1 hyd., 540 PTO, Roll-O-Matic, Goodyear 14.9-38 tires, original, unrestored, Location: 24400 MN Hwy 22 S, Litchfield, MN 55355, Contact: Ken (320) 293-6223 or Representative Eric Gabrielson (320) 693-9371
tractor, 6V system, 2 pt., fast hitch, 540 PTO, single front 7.5-10 tire, 11.2-34/10-34 rear tires, Location: 24400 MN Hwy 22 S, Litchfield, MN 55355, Contact: Ken (320) 293-6223 or Representative Eric Gabrielson (320) 693-9371
wide front, gas, 5 spd., 1 hyd., 540 PTO, 15.5-38 tires, starts, runs, drives well, Location: 225 14th Ave SE, Devils Lake, ND 58301, Contact: Wayne (701) 740-8526 or Representative Dave Krostue (218) 779-6865
wide front, diesel, 2 hyd., 540 PTO, 5 spd., 18.4-38 tires, shows 2,832 hrs., (1) New tire, starts, Location: 225 14th Ave SE, Devils Lake, ND 58301, Contact: Wayne (701) 740-8526 or Representative Dave Krostue (218) 779-6865runs, drives well,
spra-coupe, gas, 60' boom, 200 gal. tank, foamer, Raven controls, 527 hrs., single owner, Location: 61942 Winding Rd, Swatara, MN 55785, Contact: Bill (218) 697-2676 or Representative Ashley Huhn (320) 693-9371
spra-coupe, VW engine, 50' boom, 150 gal. poly tank, recent overhaul, runs and works good, 894 hrs., Location: 801 W Caledonia, Hillsboro, ND 58248, Contact: Eric (701) 636-4524 or representative Tadd Skaurud (701) 729-3644
ATV sprayer, 18 gallon, 10' breakaway folding booms, 20" spacing, 1.4 GPM Shurflo 12volt pump, spray wand, Location: 801 W Caledonia, Hillsboro, ND 58248, Contact: Eric (701) 636-4524 or Representative Tadd Skaurud (701) 729-3644
pull-type granular applicator, 50', foam markers, 5 hp. B&S, Location: 225 14th Ave SE, Devils Lake, ND 58301, Contact: Wayne (701) 740-8526 or Representative Dave Krostue (218) 779-6865
grain vac, small 1000 PTO, reversible hyd. air lock, (2) 10' SS flex tubing, (1) 12' rubber flex hose, Location: 490 146th Ave NE, Portland, ND 58274, Contact: Curtiss (701) 330-8737 or Representative Tadd Skaurud (701) 729-3644
hopper, 12' x 10', 3 1/2' height from bottom belt to top of hopper, 18" rubber conveyor, hyd., variable drive, used very little, Location: 1920 Hwy 32 N, Walhalla, ND 58282, Contact: Darryl (701) 549-3721 or Representative Dave Krostue (218) 779-6865
stalk shredder, 8 row, big/small 1000 PTO, blades in average condition, shedded, field ready, Location: 8714 48th St NE, Devils Lake, ND 58301, Contact: Doug (701) 230-1209 or Representative Dave Krostue (218) 779-6865
wood chipper, 3 pt., 540 PTO, always shedded, lightly used, Location: 490 146th Ave NE, Portland, ND 58274, Contact: Scott (701) 866-3082 or Representative Tadd Skaurud (701) 729-3644
snowblower, 60" wide, 28" high, 2 stage, 3 pt., 540 PTO w/shaft, hyd. chute rotation, skid shoes, New, includes 1 year factory warranty, Location: 2000 Main Ave E, West Fargo, ND 58078, Contact: Steve (218) 205-7198, dlr, or Representative Tadd Skaurud (701) 729-3644
snowblower, 66" wide, 28" high, 2 stage, 3 pt., 540 PTO w/shaft, hyd. chute rotation, skid shoes, New, includes 1 year factory warranty, Location: 2000 Main Ave E, West Fargo, ND 58078, Contact: Steve (218) 205-7198, dlr, or Representative Tadd Skaurud (701) 729-3644
crossover UTV, 4WD, windshield w/wiper, poly roof, rear window, 1,590 miles, 273 hrs., Location: 1967 36th Ave NE, Ardoch, ND 58261, Contact: Joel (701) 740-8206 or Representative Dave Krostue (218) 779-6865
snowmobile, 155" track, SLP pipe & canister, Dyno jet power, Commander V fuel injection module, 289 miles, Location: 1967 36th Ave NE, Ardoch, ND 58261, Contact: Joel (701) 740-8206 or Representative Dave Krostue (218) 779-6865
front mount snowblower, fits JD X475 & X700 Series, complete w/tire chains & rear weight pkg., Location:16105 34th St SE, Casselton, ND 58012, Contact: Mike (701) 212-3145 or Representative Rodney Steffes (701) 237-9173
snowblower, 24" cut, 179cc, 6 spd., 2 rev., Location: 2000 Main Ave E, West Fargo, ND 58078, Contact: Darrel (701) 361-1350
3 pt., adj. for tilt and angle, Location: 490 146th Ave NE, Portland, ND 58274, Contact: Curtiss (701) 330-8737 or Representative Tadd Skaurud (701) 729-3644
Location: 2000 Main Ave E, West Fargo, ND 58078, Contact: Guy (701) 640-0755
Location: 2000 Main Ave E, West Fargo, ND 58078, Contact: Guy (701) 640-0755
Location: 2000 Main Ave E, West Fargo, ND 58078, Contact: Guy (701) 640-0755
Location: 2000 Main Ave E, West Fargo, ND 58078, Contact: Guy (701) 640-0755
generator, 120/240v, Location: 2000 Main Ave E, West Fargo, ND 58078, Contact: Darrel (701) 361-1350
hyd. hose maker, includes crimper, (3) partial rolls of hose, dies, manual, and a pallet of numerous fittings, Location: 24400 MN Hwy 22 S, Litchfield, MN 55355, Contact: Dave (320) 894-0435 or Representative Eric Gabrielson (320) 693-9371
welder, 400 amp, diesel, welding leads not included, Location: 2000 Main Ave E, West Fargo, ND 58078, Contact: Guy (701) 640-0755
air compressor, 240v, twin cyl., approx. 20 gal., Location: 2000 Main Ave E, West Fargo, ND 58078, Contact: Darrel (701) 361-1350
table saw, Location: 2000 Main Ave E, West Fargo, ND 58078, Contact: Darrel (701) 361-1350
like new, used 20 hrs., Location: 3719 160th Ave, Twin Valley, MN 56584, Contact: Ethan (406) 552-3281 or Representative Tadd Skaurud (701) 729-3644
offset design, 17.5" wave coulters, Location: 490 146th Ave NE, Portland, ND 58274, Contact: Curtiss (701) 330-8737 or Representative Tadd Skaurud (701) 729-3644
New in box, Location:16105 34th St SE, Casselton, ND 58012, Contact: Mike (701) 212-3145 or Representative Rodney Steffes (701) 237-9173
Location: 605 E Winfield Ave, Mt. Pleasant, IA 52641, Contact: Representative Chris Richard (319) 217-0657
Location: 2000 Main Ave E, West Fargo, ND 58078, Contact: Guy (701) 640-0755
Location: 2000 Main Ave E, West Fargo, ND 58078, Contact: Guy (701) 640-0755
80 lb. each, bolt-on w/3 bolts, off of JD 2755 w/28" wheels, 19" across, 13" centers, Location: 2718 Cty Hwy 19, Ada, MN 56510, Contact: Kristopher (218) 790-7060 or Representative Dave Krostue (218) 779-6865
16" wide, off Buhler MFWD tractor, Location: 490 146th Ave NE, Portland, ND 58274, Contact: Scott (701) 866-3082 or Representative Tadd Skaurud (701) 729-3644
(4) 6' sections, mounted 3 bar harrow, for field cultivator, excellent condition, Location: 490 146th Ave NE, Portland, ND 58274, Contact: Curtiss (701) 330-8737 or Representative Tadd Skaurud (701) 729-3644
(10) NH3 cover-up disc assemblies w/brackets, Location: 801 W Caledonia, Hillsboro, ND 58248, Contact: Eric (701) 636-4524 or Representative Tadd Skaurud (701) 729-3644
(2) manifolds w/gauges, (14) coil spring shanks, misc. points, John Blue hyd. nitrolator w/breakaway coupler and hose, Location: 801 W Caledonia, Hillsboro, ND 58248, Contact: Eric (701) 636-4524 or Representative Tadd Skaurud (701) 729-3644
Location: 801 W Caledonia, Hillsboro, ND 58248, Contact: Eric (701) 636-4524 or Representative Tadd Skaurud (701) 729-3644
(2) Sunflower shank assembly, Location: 801 W Caledonia, Hillsboro, ND 58248, Contact: Eric (701) 636-4524 or Representative Tadd Skaurud (701) 729-3644
(6) JD and (4) misc., Location: 801 W Caledonia, Hillsboro, ND 58248, Contact: Eric (701) 636-4524 or Representative Tadd Skaurud (701) 729-3644
Location: 801 W Caledonia, Hillsboro, ND 58248, Contact: Eric (701) 636-4524 or Representative Tadd Skaurud (701) 729-3644
light fixtures w/ballasts, 400w, M59 lamp type, Location: 801 W Caledonia, Hillsboro, ND 58248, Contact: Eric (701) 636-4524 or Representative Tadd Skaurud (701) 729-3644
transit, level, & tripod, Location: 2000 Main Ave E, West Fargo, ND 58078, Contact: Darrel (701) 361-1350
3/8" drill, Location: 2000 Main Ave E, West Fargo, ND 58078, Contact: Darrel (701) 361-1350
3/8" drill, Location: 2000 Main Ave E, West Fargo, ND 58078, Contact: Darrel (701) 361-1350
3/8" drill, Location: 2000 Main Ave E, West Fargo, ND 58078, Contact: Darrel (701) 361-1350
sawzall, Location: 2000 Main Ave E, West Fargo, ND 58078, Contact: Darrel (701) 361-1350
circular saw, 7", Location: 2000 Main Ave E, West Fargo, ND 58078, Contact: Darrel (701) 361-1350
The auction has resumed. Please click OK to continue bidding. Sorry for the inconvenience.
The auction has been paused due to technical difficulties and will resume shortly. Please stand by...