4WD, deluxe cab, leather trim, powershift, 5 hyd., high flow hyd., PTO, GreenStar ready, diff lock, (2) 165 lb. & (4) 450 lb. rear outside weights, 480/80R50 duals, 1,113 hrs., Location: 6401 W 12th St, Sioux Falls, SD 57106, Contact: Chris (605) 336-1933 or Representative Chris Bair (605) 271-7730
track tractor, 4 hyd., 3 pt. hitch, PTO, front weights, 120" gauge, 18" tracks, 5,710 hrs., recent engine and main hyd. pump work (call for more info), Location: 1814 NW 30th St, Pratt, KS 67124, Contact: Matt (620) 388-0015, dlr, Representative Chris Bair (605) 271-7730
4WD tractor, deluxe cab, 12 spd., 3 hyd., AutoTrac ready, 710R38 duals, 8,269 hrs., recent injector and transmission work (call for more info), Location: 115 W Railroad, Bucklin, KS 67834, Contact: Ron (620) 338-1832, dlr, Representative Chris Bair (605) 271-7730
self-propelled sprayer, 120' boom, 1,200 gal. SS tank, AIM Command, 5-way nozzle bodies, foam marker, Raven 5000 flow control, AutoBoom one-button fold, HID aux. light pkg., wired for Trimble FMX steering & boom auto shut-off (neither included), shows 1,932.9 hrs., Location: 6253 Hwy 20, Webster, ND 58382, Contact: Brian (701) 230-2139 or Representative Dave Krostue (218) 779-6865
IHC DT530, Allison automatic, 70' booms, 7 ton SS tank, flip tarp, Raven light bar, Dickey John DCS100 monitor, 30,193 miles, 2,909 hrs., Location: 8967 Cty Rd 12, Hensel, ND 58241, Contact: Taylor (701) 520-1955 or Representative Tadd Skaurud (701) 729-3644
combine tracks, 36" Goodyear tracks, hyd. tension, (4) boogie wheels, adapters for JD or Case-IH combine, used on less than 500 acres, Location: 2000 Main Ave E, West Fargo, ND 58078, Contact: Brad (701) 238-0240 or Representative Tadd Skaurud (701) 729-3644
Field Tracker, 2WD, auto steer, rock trap, chopper, long unloading auger, 20.8-42 duals, 1,547 sep. hrs., 2,324 engine hrs., Location: 27925 US Hwy 81, Freeman, SD 57029, Contact: Chris (605) 336-1933, dlr, or Representative Chris Bair (605) 271-7730
axial flow, RWA, specialty rotor, AHH, RS, fore/aft, AFS Y&M, mapping, 600 monitor, rock trap, Crary hopper ext., 3 cyl. lift, 30.5L32 front tires, 18.4R26 rear tires, 1,812 sep. hrs., 2,324 engine hrs., Location: 500 Ingersoll Ave, Crookston, MN 56716, Contact: Adam Olmstead at Titan Machinery (218) 281-4668 or Representative Dave Krostue (218) 779-6865
axial flow, AFX rotor, RWA, deluxe controls, AHH, RS, fore/aft, Auto Trac ready, Y&M, chopper, chaff spreader, rock trap, hopper ext., 3rd cyl.lift, almost new 30.5-32 front duals, New 16.9.24 rear tires, 2,675 sep. hrs., 3,666 engine hrs., Location: 500 Ingersoll Ave, Crookston, MN, 56716, Contact: Jim Helgeson at Titan Machinery (218) 281-4668 or Representative Dave Krostue (218) 779-6865
axial flow, AFX rotor, RWA, AHH, fore/aft, rock trap, chopper, chaff spreader, hopper ext., 3rd cyl. lift, 30.5-32 front tires, 14.9-24 rear tires, 4,594 engine hrs., Location: 500 Ingersoll Ave, Crookston, MN 56716, Contact: Chris Dufault at Titan Machinery (218) 281-4668 or Representative Dave Krostue (218) 779-6865
flex head, 35', fore/aft, stubble lights, full finger auger, poly bottom, single pt. hookup, Location: 2905 5th Ave NE, Northwood, ND 58267, Contact: Mike at True North Equipment (701) 335-3804 or Representative Dave Krostue (218) 779-6865
flex head, 35', fore/aft, stubble lights, full finger auger, poly bottom, single pt. hookup, AWS, Location: 1460 Hwy 75 S, Kennedy, MN 56733, Contact: Mike at True North Equipment (701) 335-3804 or Representative Dave Krostue (218) 779-6865
flex head, 25', hyd. fore/aft, off IHC 1680, Location: 15751 105th Ave NE, Foley, MN 56329, Contact: Allen (320) 223-5811 or Representative Eric Gabrielson (320) 693-9371
rigid head, 25', fore/aft, bat reel, Location: 2905 5th Ave NE, Northwood, ND 58267, Contact: Mike at True North Equipment (701) 335-3804 or Representative Dave Krostue (218) 779-6865
corn head, 12x30", Contour-Master, hyd. deck plates, knife rolls, AHH, stubble lights, single pt. hookup, chains like new, poly in decent shape, Location: 4181 77th St NE, Wolford, ND 58385, Contact: Jason (701) 771-2593 or Representative Dave Krostue (218) 779-6865
sunflower head, 25', 9" sunflower pan, Location: 2905 5th Ave NE, Northwood, ND 58267, Contact: Mike at True North Equipment (701) 335-3804 or Representative Dave Krostue (218) 779-6865
all crop head, 6x30", sunflower back, Location: Call for directions, Kent, MN 56553, Contact: Jesse (701) 899-2669 or Representative Tadd Skaurud (701) 729-3644
pickup head, 12', 6-belt pickup, wind guard,
Location: 14854 Hwy 17, Grafton, ND 58237, Contact: Mike at True North Equipment (701) 335-3804 or Representative Dave Krostue (218) 779-6865
pickup head, 6-belt pickup, Location: 2905 5th Ave NE, Northwood, ND 58267, Contact: Mike at True North Equipment (701) 335-3804 or Representative Dave Krostue (218) 779-6865
pickup head, Sund pickup, Location: 2905 5th Ave NE, Northwood, ND 58267, Contact: Mike at True North Equipment (701) 335-3804 or Representative Dave Krostue (218) 779-6865
Harvest Commander cart, walking tandems, 1000 PTO, hyd. spout, scale, 20.8-42 tires, Location: 1361 W Hwy 24, Hoxie, KS 67740, Contact: Mark (620) 826-5134, dlr, Representative Chris Bair (605) 271-7730
grain cart, bin extension, 1000 PTO, 35.5-32 tires, Location: 115 W Railroad, Bucklin, KS 67834, Contact: Mark (620) 826-5134, dlr, Representative Chris Bair (605) 271-7730
60.5', 6" space, 7.5" Maxxi-Grip sweep, tandems across, single point depth, (4) wing stabilizer wheels, ACS round tube baskets, 2-bar harrow, less than 100 acres, Location: 2718 Cty Hwy 19, Ada, MN 56510, Contact: Isaac (218) 784-8249 or Representative Dave Krostue (218) 779-6865
field cultivator, 45', 3-section fold, single depth control, C-shank, walking tandems all around, Location: 1460 Hwy 75 S, Kennedy, MN 56733, Contact: Mike at True North Equipment (701) 335-3804 or Representative Dave Krostue (218) 779-6865
C-shank, walking tandems around, 3-section folding, 3-bar harrow, Location: 5101 Gateway Dr, Grand Forks, ND 58203, Contact: Mike at True North Equipment (701) 335-3804 or Representative Dave Krostue (218) 779-6865
S-tine cultivator, 36', 4" spacing, 5" sweeps, floating hitch, single point depth, walking tandems on main, double singles on wings, 4-bar harrow, rear hitch and hyd., light pkg., Location: Call for directions, Kent, MN 56553, Contact: Jesse (701) 899-2669 or Representative Tadd Skaurud (701) 729-3644
64’, rolling harrow w/leveler bar & telescoping hitch, tandem wheels & singles on wings, walking tandems on main frame, 5 fold, large basket, less than 500 acres, Location: 17398 7th St SE, Hillsboro, ND 58045, Contact: Kevin (701) 430-0965 or Representative Dave Krostue (218) 779-6865
crumbler, 55', ext. pole, 5-section fold, could remove 2nd set of wings to make it 40', 31x13.50-15 tires, Location: Call for directions, Kent, MN 56553, Contact: Jesse (701) 899-2669 or Representative Tadd Skaurud (701) 729-3644
chisel plow, 44', AccuDepth, JD 3-bar harrow, 3" twist shovels, (one end good), Location: Hwy 75, Hendrum, MN 56550, Contact: Mark (218) 790-8390 or Representative Greg Holte (218) 790-1705
coulter chisel, 24', 15" shank space, twist shovels, Summers 104 3-bar harrow, discs in good condition, Location: Hwy 75, Hendrum, MN 56550, Contact: Paul (701) 371-6521 or Representative Greg Holte (218) 790-1705
plow, 7 bottom, full pull, on land, auto trip, 2 pt., Location: 115 W Railroad, Bucklin, KS 67834, Contact: Mark (620) 826-5134, dlr, Representative Chris Bair (605) 271-7730
plow, 2 bottom, 1 way, autolift, coulters, Location: 40818 246th St, Mitchell, SD 57301, Contact: Representative Chris Bair (605) 271-7730
antique plow, 2 bottom, OEM break away detach hitch, year is unknown, Location: 7738 90th Ave S, Sabin, MN 56580, Contact: Jayme (218) 790-6400
harvester, 12x22", AccuDepth, poly grab rolls, row finder, marker lights, front & rear rolls, reverse grab rolls, large 1000 PTO, belted chain, top mount mud scrapers, serviced every year, Location: 17398 7th St SE, Hillsboro, ND 58045, Contact: Kevin (701) 430-0965 or Representative Dave Krostue (218) 779-6865
harvester, 12x22", poly grab rolls, row finder, marker lights, front & rear rolls, reverse grab rolls, large 1000 PTO, belted chain, top mount mud scrapers, serviced every year, No AccuDepth, Location: 17398 7th St SE, Hillsboro, ND 58045, Contact: Kevin (701) 430-0965 or Representative Dave Krostue (218) 779-6865
defoliator, 12x22” steel front, folding topper, back (2) studded rubber rolls, large 1000 PTO, 12.4-22 tires, Location: 17398 7th St SE, Hillsboro, ND 58045, Contact: Kevin (701) 430-0965 or Representative Dave Krostue (218) 779-6865
defoliator, 12x22”, steel cup front, 1000 PTO, large tires, New center bearings last year, Location: 17398 7th St SE, Hillsboro, ND 58045, Contact: Kevin (701) 430-0965 or Representative Dave Krostue (218) 779-6865
defoliator, 4x30", 1 drum steel, 2 drums rubber flails, 1000 PTO, missing gear box, Location: Call for directions, Kent, MN 56553, Contact: Jesse (701) 899-2669 or Representative Tadd Skaurud (701) 729-3644
air drill, 40', 10" spacing, edge-on shanks, disc levelers, 3400 tow-behind cart, twin compartment, hyd. auger, Location: 2905 5th Ave NE, Northwood, ND 58267, Contact: Mike at True North Equipment (701) 335-3804 or Representative Dave Krostue (218) 779-6865
air drill, 45', 7-1/2" spacing, single shoot, wing fold, packer wheels, hyd. drill fill, no monitor, Location: 1460 Hwy 75 S, Kennedy, MN 56733, Contact: Mike at True North Equipment (701) 335-3804 or Representative Dave Krostue (218) 779-6865
direct mount scraper, 23 yd., hyd. ejection, (2) 20.5 & (2) 23.5 tires, hyd. brakes, in-cab readout for scraper position, reversible cutting edge with frost blade, custom-built scraper with custom gooseneck hitch, Location: 6149 40th Ave SE, Napoleon, ND 58561, Contact: Representative Tadd Skaurud (701) 729-3644
motor grader, 6WD, tall cab, A/C & heat, 8 spd. powershift, front hyd., 14' board, w/snow wing, tires at 75%, 12,456 hrs., low hrs. on rebuild, Location: 1091 107th St, Bottineau, ND 58318, Contact: Rob (701) 228-5830 or Representative Dave Krostue (218) 779-6865
smooth drum compacter, ROPS, 80" drum, shows 6,445 hrs., runs very well, Location: 1091 107th St, Bottineau, ND 58318, Contact: Rob (701) 228-5830 or Representative Dave Krostue (218) 779-6865
walk-behind broom, Kohler Command Pro 8.5 hp., 5 forward/2 reverse speeds, direct drive, no belts or chains, 36" cleaning width, 25" diameter brushes, manual angle change, 20 degrees left or right, caster wheels, 16x4.5" drive tires, Location: 5101 Gateway Dr, Grand Forks, ND 58203, Contact: Mike at True North Equipment (701) 335-3804 or Representative Dave Krostue (218) 779-6865
hyd. sweeper, 6', hyd. swivel & lift, Location: 2000 Main Ave E, West Fargo, ND 58078, Contact: Guy (701) 640-0755
articulating loader, ROPS, Deutz 4 cyl. diesel, 62 hp., joy stick loader control, Location: 500 Ingersoll Ave, Crookston, MN 56716, Contact: Bob at Titan Machinery (218) 281-4668 or Representative Dave Krostue (218) 779-6865
heavy duty hyd. rock grapple, rotates 360 degrees, fits mini excavators, Location: 9808 Cty Rd 21, Hankinson, ND 58041, Contact: Troy (701) 640-0754 or Representative Tadd Skaurud (701) 729-3644
pallet forks, 54" carriage, 48" forks, universal skid steer loader mount, Location: 2000 Main Ave E, West Fargo, ND 58078, Contact: Mark (701) 541-0343 or Representative Tadd Skaurud (701) 729-3644
(2) hyd. cylinders, 9" spacing, flat face hyd. connectors, universal skid steer loader mounts, Location: 2000 Main Ave E, West Fargo, ND 58078, Contact: Mark (701) 541-0343 or Representative Tadd Skaurud (701) 729-3644
10', 36" tall x 42" deep, 3/16" thick shell, 5/16" thick end plates/side, 1/2" thick under supports, w/3/4" reversible bolt-on cutting edge, plasma cut screen in bucket, bolt in removable interior braces, New, call for an affordable shipping quote, Location: 22401 Cty Rd 36, Long Prairie, MN 56347, Contact: Eric (320) 491-8548, dlr, or Representative Eric Gabrielson (320) 693-9371
The auction has resumed. Please click OK to continue bidding. Sorry for the inconvenience.
The auction has been paused due to technical difficulties and will resume shortly. Please stand by...