12 spd. w/quad range, 4 hyd., 6 cyl. Cummins, 330 hp., Degelman 16' dozer blade, blade S/N12109, rear weight package, 20.8-38 Michelin duals, 70% rubber, shows 2,000 hrs., 2nd owner, recent A/C, axle tube, & alternator work, Location: 6144 90th St SW, Morristown, SD 57645, Contact: Mark (701) 522-3450
855 Cummins diesel, 12 spd., 4 hyd., 20.8R38 band duals, New 520/38 outside RR tire, complete New steering column, shows 12,609 hrs., Location: 2500 State Mill Rd, Grand Forks, ND 58201, Contact: Chris at ICS (701) 317-0734 or Representative Dave Krostue (218) 779-6865
powershift, 2 hyd., 3 pt., 540/1000 PTO, 11:00-16 front tires, 18.4-38 rear tires, blown engine, Location: 12241 75th St NE, Edinburg, ND 58227, Contact: Rodney (701) 993-8737 or Representative Dave Krostue (218) 779-6865
loader w/grapple, 8' bucket, came off Case 2094, Location: 12241 75th St NE, Edinburg, ND 58227, Contact: Rodney (701) 993-8737 or Representative Dave Krostue (218) 779-6865
powershift, 3 hyd., 3 pt., 1000 PTO, 14L-16.1 front tires, 20.8R38 rear tires, transmission is stuck, Location: 12241 75th St NE, Edinburg, ND 58227, Contact: Rodney (701) 993-8737 or Representative Dave Krostue (218) 779-6865
open station, wide front, gas, syncro, 2 hyd., 3 pt., 540/1000 PTO, 11L15 front tires, 13.6-38 rear tires, shows 7,560 hrs., Location: 2500 State Mill Rd, Grand Forks, ND 58201, Contact: Chris at ICS (701) 317-0734 or Representative Dave Krostue (218) 779-6865
field cultivator, 60', gauge wheels, tandems across, 3-bar harrow, single pt. depth control, 7" JD knock-ons, a few reinforcement welds, Location: 9063 55th St NE, Crary, ND 58327, Contact: Francis (701) 230-2358 or Representative Dave Krostue (218) 779-6865
harrow, 60', teeth in good condition, missing one section, Location: 1210 162nd Ave SE, Grandin, ND 58038, Contact: Dan (701) 238-0621 or Representative Gregg Holte (218) 790-1705
plow, 6 bottom, 2 pt., some broken plow lays, Location: 1601 N 73rd St, Grand Forks, ND 58201, Contact: Jerry (701) 739-0206 or Representative Dave Krostue (218) 779-6865
drill, 12', 6" spacing, Location: 314 Hill St, Dwight, ND 58075, Contact: Rick (701) 640-2239
self-propelled sprayer, 90' boom, 20" spacing, 1,080 gal. SS tank, 3" fill, foam markers, induction system, adj. width, air ride cab, Raven SmarTrax steering, Raven Viper Pro monitor, AccuBoom, 3,285 hrs., Location: 611 S Logan Ave, Oakland, NE 68045, Contact: Billy (402) 380-3094 or Representative Chris Bair (605) 271-7730
self-propelled sprayer, 90' boom, 20" spacing, 1,200 gal. SS tank, 3" fill, tank rinse system, induction system, adj. width, air ride cab, Outback S2 guidance system, Outback E-Drive TC, 380/90R46 tires, 5,393 hrs., Location: 611 S Logan Ave, Oakland, NE 68045, Contact: Billy (402) 380-3094 or Representative Chris Bair (605) 271-7730
(4) 20.8R38 flotation tires on 10-bolt rims, off of Case-IH sprayer, Location: 2000 Main Ave E, West Fargo, ND 58078, Contact: Representative Tadd Skaurud (701) 729-3644
Location: 611 S Logan Ave, Oakland, NE 68045, Contact: Billy (402) 380-3094 or Representative Chris Bair (605) 271-7730
sprayer, 90' boom, 1,000 gal. tank, Hypro PTO pump, hyd. up/down, height control, foam markers, clean water tank, Location: 441 11th St, Reynolds, ND 58275, Contact: Larry (701) 739-2558, or Representative Dave Krostue: (218) 779-6865
liquid fertilizer side dresser, 24x22", 1,800 gal. tank, hyd. pump, Clymer coulters w/injectors, 320R46 tires & duals, Raven controls, no display, very low acres, Location: 17245 Cty Rd 8, Wahpeton, ND 58075, Contact: Vince (701) 640-3476 or Representative Gregg Holte (218) 790-1705
row crop beet cultivator, 24x22", (2) 250 gal. fertilizer tanks, Hypro pump, side dresser, can be converted back to a row crop cultivator, Location: 6290 200th Ave N, Georgetown, MN 56546, Contact: Tom (701) 793-6300 or Representative Randy Kath (320) 693-9371
band sprayer, 72x22", 750 gal. tank, hyd. pump, truck tires on main, Location: 6290 200th Ave N, Georgetown, MN 56546, Contact: Tom (701) 793-6300 or Representative Randy Kath (320) 693-9371
band sprayer, 36x22", broadcast boom, 500 gal. tank, hyd. pump, 2 pt. w/lift assist, Location: 38177 390th St NW, Stephen, MN 56757, Contact: John (612) 718-6956 or Representative Tadd Skaurud (701) 729-3644
fertilizer spreader, 8 ton, 540 PTO, twin spinner, roll tarp, Location: 6290 200th Ave N, Georgetown, MN 56546, Contact: Tom (701) 793-6300 or Representative Randy Kath (320) 693-9371
ID plate is legible, Location: 2000 Main Ave E, West Fargo, ND 58078, Contact: John (701) 361-9104 or Representative Tadd Skaurud (701) 729-3644
ID plate is legible, Location: 2000 Main Ave E, West Fargo, ND 58078, Contact: John (701) 361-9104 or Representative Tadd Skaurud (701) 729-3644
(1) Dickey John CMS 100 rate monitoring system, (1) Dickey John servo hydraulic flow control valve, Location: 2000 Main Ave E, West Fargo, ND 58078, Contact: Tim (701) 741-2458 or Representative Dave Krostue (218) 779-6865
mower conditioner, 12', hydra swing, rubber roll conditioner, manual & spare parts in shop, Location: 24400 MN Hwy 22 S, Litchfield, MN 55355, Contact: Gaylen (320) 583-6405 or Representative Randy Kath (320) 693-9371
haybine, 16', 540 PTO, twin knife, hyd. swing, rubber crimper rolls, 31x13.5-15 tires, Location: 12924 49th St SE, Enderlin, ND 58027, Contact: Blake (701) 680-2004 or Representative Tadd Skaurud (701) 729-3644
round baler, 5x6, 1000 PTO, slip clutch, variable core, net wrap, MegaWide pickup, high-flotation tires, approx. 16,000 bales, Location: 1850 Key Ave, Le Mars, IA 51031, Contact: Denny (712) 541-5893, dlr, or Representative Chris Bair (605) 271-7730
round baler, 5x6, 1000 PTO, slip clutch, variable core, auto net wrap, hyd. pickup lift, HD compression rack, cob filter, bale kicker, 21.5-16.1 tires, 7,515 total bales, Location: 1850 Key Ave, Le Mars, IA 51031, Contact: Denny (712) 541-5893, dlr, or Representative Chris Bair (605) 271-7730
round baler, 5x6, variable core, 1000 PTO, full auto cycle, suspension axle, wide super sweep, hyd. lift pickup, net/twine wrap, electronic monitor, 21.5-16.1 flotation tires, 9,558 bales, Location: 1850 Key Ave, Le Mars, IA 51031, Contact: Denny (712) 541-5893, dlr, or Representative Chris Bair (605) 271-7730
round baler, 5x6, variable core, 1000 PTO, slip clutch, auto net/twine wrap, electronic monitor, MegaWide pickup, 1 year on chain & sprocket rebuild, 21.5-16 tires, 11,878 bales, Location: 1850 Key Ave, Le Mars, IA 51031, Contact: Denny (712) 541-5893, dlr, or Representative Chris Bair (605) 271-7730
round baler, 5x6, variable core, net/twine wrap, standard pickup, bale kicker, electronic bale monitor, standard tires, 14,838 bales, Location: 1850 Key Ave, Le Mars, IA 51031, Contact: Denny (712) 541-5893, dlr, or Representative Chris Bair (605) 271-7730
round baler, auto twine tie, 1000 PTO, lace belts, bale kicker, 31x13.5-15 tires, New gearbox, rebuilt pickup, all New chain, Location: 12924 49th St SE, Enderlin, ND 58027, Contact: Blake (701) 680-2004 or Representative Tadd Skaurud (701) 729-3644
round baler, 5x6, 1000 PTO, slip clutch, variable core, net/twine wrap, auto twine, hyd. lift & tension, electronic monitor, gathering wheels, flotation tires, Location: 1850 Key Ave, Le Mars, IA 51031, Contact: Denny (712) 541-5893, dlr, or Representative Chris Bair (605) 271-7730
square baler, 3'x4' bale, 1000 PTO, w/monitor, approx. 13,000 bales, 18.4-26 diamond tread tires, Location: 1040 Gabriel Ave, Mt. Pleasant, IA 52641, Contact: Clint Roth (319) 931-7266 or Representative Terry Hoenig (319) 470-7120
grinder mixer, hyd. swing auger, scale, Location: 24400 MN Hwy 22 S, Litchfield, MN 55355, Contact: Chris (952) 457-9783 or Representative Randy Kath (320) 693-9371
mixer mill, 540 PTO, corn screen, Location: 5927 137 Ave SE, Enderlin, ND 58027, Contact: Bob (701) 799-8843 or Representative Rodney Steffes (701) 237-9173
corn head, 8x30", knife rolls, Location: 2000 Main Ave E, West Fargo, ND 58078, Contact: Representative Tadd Skaurud (701) 729-3644
swather, 20' head, Ford Industrial gas, not running, Location: 12241 75th St NE, Edinburg, ND 58227, Contact: Rodney (701) 993-8737 or Representative Dave Krostue (218) 779-6865
72" Aerocab Aerodyne sleeper, 12.7 liter 60 Series Detroit, 500 hp., Eaton Fuller 13 spd., BorgWarner Turbo, ported & polished manifold, Fitzgerald glider, Kenworth AG400 susp., VIT interior, fridge, deep tropical blue, 236" WB, Michelin 22.5 low pro tires on Dura-Bright wheels, 3.42 rear tires, 24,266 miles, Location: 2725 Whynaucht Court SE, Rochester, MN 55903, Contact: R.J. (507) 251-7555 or Representative Randy Kath (320) 693-9371
70" mid-roof XT sleeper, 14.0 Detroit, 500 hp., 10 spd. autoshift, jake brake, air ride susp., air ride cab, air slide 5th, A/C, custom interior, power windows & locks, tilt, cruise, dual aluminum fuel tanks, dual chrome stack, 40,000 lb. front, 232" WB, 3:55 ratio, 22.5 tires on aluminum, fronts at 45%, rears at 75%, shows 578,000 miles, **Title Stamped Rebuilt**, Location: 6144 90th St SW, Morristown, SD 57645, Contact: Mark (701) 522-3450
integrated sleeper, ISX Cummins, 435 hp., Meritor 10 spd., air ride, jake brake, diff lock, cruise, CD player, sliding 5th wheel, 240" WB, 11R22.5 tires, 1,007,024 miles, Location: 55937 State Hwy 19, Winthrop, MN 55396, Contact: Randy (320) 894-5355 or Representative Eric Gabrielson (320) 693-9371
integrated sleeper, ISX Cummins, 450 hp., 9 spd., air ride, jake brake, diff lock, cruise, air slide 5th, PTO, no wet kit, 200" WB, 285/75R24.5 tires on outside aluminum, 804,937 miles, 2,000 miles on new clutch, all New brakes & drums, Fresh DOT, Location: 1758 460th St, Cottonwood, MN 56229, Contact: Jacob (507) 828-6250 or Representative Eric Gabrielson (320) 693-9371
72" Aerodyne sleeper, C15 Cat, 500 hp., Eaton Fuller 13 spd., dual air ride seats, heated leather driver seat, ext. mirrors, air up/down pusher axle w/duals, air slide 5th, diff lock, cruise, engine brake, aluminum headache rack w/compartments, dual aluminum fuel tanks, fuel/hyd. tank, beacons, 244" WB, 3:55 ratio, 285/75R24.5 tires on aluminum, 255/70R22.5 tires on aluminum on pusher, 1,073,852 actual miles, 40,000 miles on complete overhaul at Butler, 3 yrs. on New trans. & rear ends, 2 yrs. on New king pins & springs, Location: 2225 Main Ave S, Moorhead, MN 56560, Contact: Justin (701) 213-0040 or Representative Tadd Skaurud (701) 729-3644
flat top sleeper, E7, 350 hp., 10 spd., 2-Line wet kit, 198" WB, 22.5 tires on all aluminum wheels, 857,066 miles, Location: 6290 200th Ave N, Georgetown, MN 56546, Contact: Tom (701) 793-6300 or Representative Randy Kath (320) 693-9371
day cab, 9 spd., air ride, jake brake, diff lock, cruise, air slide 5th, wet kit, 50 gal. reservoir, 208" WB, 295/75R22.5 tires & rims, shows 906,795 miles, Location: 1758 460th St, Cottonwood, MN 56229, Contact: Jacob (507) 828-6250 or Representative Eric Gabrielson (320) 693-9371
hopper bottom pup, 20'x96"x72", air ride, air scale, roll tarp, LED lights, 2-row marker lights, 16-1/2' pole, 11R24.5 virgin Bridgestone tires on outer aluminum rims, 50%, Location: 14376 73rd St SE, Milnor, ND 58060, Contact: Dave (701) 680-1540 or Representative Tadd Skaurud (701) 729-3644
tri-axle aluminum end dump, 36'x102"x78", air ride, front lift axle, aluminum tub & frame, 22.5 tires, tipped over, minimal damage, Title Marked Prior Salvage, Location: 1601 N 73rd St, Grand Forks, ND 58201, Contact: Jerry (701) 739-0206 or Representative Dave Krostue (218) 779-6865
aluminum end dump, 34' frame, 32' box, air ride, rear door beet ext., 24.5 tires, *Title Will Take 4-6 Weeks*, Location: 6290 200th Ave N, Georgetown, MN 56546, Contact: Tom (701) 793-6300 or Representative Randy Kath (320) 693-9371
Tri-axle aluminum end dump, 36'x102"x78", air ride, front lift axle, aluminum tub & frame, 22.5 tires, tipped over, minimal damage, Title Marked Prior Salvage, Location: 1601 N 73rd St, Grand Forks, ND 58201, Contact: Jerry (701) 739-0206 or Representative Dave Krostue (218) 779-6865
Lowboy NGB, tri-axle hyd. detachable, non-ground bearing, 50 ton, 50'x102", 14' neck, 22' well, 13' 6" back platform, open well, outriggers, detachable neck, air ride, 22.5 tires on steel, Location: 23125 430th St SE, Winger, MN 56592, Contact: Clay at Luckens (218) 280-3451 or Representative Dave Krostue (218) 779-6865
tandem axle mechanical detach, 30 ton, air ride, 28'9" well, 10' front deck, 8' rear deck, 12" swing outriggers, digital Right Weigh load scale, 225/70R22.5 tires on aluminum rims, 70%, brakes at 90%, New paint, decking, & wiring, Location: 2225 Main Ave S, Moorhead, MN 56560, Contact: Justin (701) 213-0040 or Representative Tadd Skaurud (701) 729-3644
The auction has resumed. Please click OK to continue bidding. Sorry for the inconvenience.
The auction has been paused due to technical difficulties and will resume shortly. Please stand by...