TIMED ONLINE
MACHINE SHOP AUCTION
LOCATION: Thief River Falls High School, 230 Labree Ave. S, Thief River Falls, MN
OPENS: MONDAY, JUNE 16
CLOSES: MONDAY, JUNE 23
PREVIEW: By appointment only, Eric Gabrielson of Steffes Group, 701.238.2570 or Tadd Skaurud of Steffes Group, 701.729.3644.
LOADOUT: Tuesday, June 24, 9:00 AM – 4:00 PM. Rigging charges will apply. Please contact Eric Gabrielson for quotes at 701.238.2570.
MACHINE SHOP EQUIPMENT
South Bend bench top lathe, through center, 10" bed, 4" swing, with some tooling, 110v, includes stand, "green", S/N8187AN
Hansvedt EDM 201, 9'x15" work table size, 8" ram travel, 18 gal. work tank capacity, 6"x8" work table travel, with all manuals, S/NAP13836
Brown & Sharpe 305 Dyna Master vertical mill machine, 3 phase, w/Sony Magnascale LF200 digital readout, cutting fluid, some tooling & 8" vise included, working order, S/N503-25-04
Vise, 6", for milling machine
Sheldon Machine Co. EM56P lathe, through centers, 13" swing, 4' bed, 31" between centers, Aloris tool post, one tool holder, 4-jaw chuck w/back gear, 3 phase, S/NEM26413
Sheldon Machine Co. EXL44R lathe, through center, 10" swing, 44" bed, 21" between centers, Aloris toolpost, 3-jaw chuck, 3 phase, S/N10631D
LeBlond lathe, through center, 12" swing, 30" between centers, Aloris tool post, Cushman 4-jaw chuck, extra Cushman 836LO 3-jaw chuck, 3/4 hp., 3 phase
Hardinge DSM 59 tool lathe, through center, 8" swing, 12" between centers, 1 hp., 4-jaw chuck, on stand, 1 hp., 3 phase
1952 Kearney & Trecker horizontal plane mill, 9" vise, cutting fluid, 5 hp., 3 phase, unknown if in working order, S/N6-6737
Di-Acro #12 12-head manual punch on stand with misc. dies, S/NBD-2298
Bridgeport power head, belt drive, with R-8 collett, 3 phase, S/NT2103
Herman Stone Co granite surface plate, 30"x20" with stand, S/N81038
Di-Acro H11.01 power tube bender with many dies, 3 phase, working order, S/N000610
Kalamazoo 18-T-10 Startrite vertical band saw, variable speed, 3 phase, with manuals, S/N46353
Dividing head, 3-jaw chuck
Heck #3 trace puncher, 110v, with one die, on stand, S/N31384
Pexto 63F bar folder, 22 ga. cap., working order, has been repaired
Pexto work table, 8'x40"x32", (3) shelves, no mandrels included
DSP Monoxivent 712 source capture system with casters, 1 phase, 880 hrs.
DSP Monoxivent 711 source capture system with casters, 1 phase, 1,346 hrs.
DSP Monoxivent 687 source capture system with casters, 1 phase, 580 hrs.
DSP Monoxivent 713 source capture system with casters, 1 phase, 1,077 hrs.
DSP Monoxivent 710 source capture system with casters, 1 phase, 484 hrs.
DSP Monoxivent 688 source capture system with casters, 1 phase, 736 hrs.
WELDERS & WELDING TABLES
Lincoln AC/DC 225-125 arc welder with leads, 1 phase, like new" 10426
Lincoln AC/DC 250-125 arc welder with leads, 1 phase, on stand, with assorted supplies, S/N306829
Miller HF Dial Arc tig welder with foot control, tig torch and regulator, 3 phase, S/NJC621950
Miller HF Dial Arc tig welder with foot control, tig torch, no regulator, on 4-wheel cart, 3 phase
Miller MPS 20 portable spot welder with foot control, on stand, 3 phase, S/NHE784013
Tillman welding curtains, one pair
Shop-built welding table 4'x27", back rest, with bricks
Shop-built welding table 4'x27", back rest, with some bricks
Shop-built welding table, 36"x70", 29"" working height
GRINDERS
Sioux 645L valve grinder, 1 phase, S/N40302
Sioux valve seat grinder, with case
Baldor bench grinder, 10" wheels, 2 hp., on stand, 3 phase
Boyar-Shultz H612 "surface grinder, Ceramax magnetic vise, 1 hp., 3 phase, S/N23602
Harig surface grinder, 618w, with B&S magnetic vise, 1 hp., 3 phase, manuals included
OTHER SHOP EQUIPMENT
Lincoln W93612 hyd. shop press, 40,000 lb., 20" wide x 32" work area, 20 ton jack, 6' tall
Delta Rockwell 15-655 drill press, 14x11 table, 1/2 Jacobs chuck, Morse taper spindle, 1/2 hp., 110v, in working order, S/N1557913
Aaseby chop saw, 19-1/2' table, 16" wheel, 10 hp., with Heinrich vise, 3 phase
Complete sand casting station: includes Speedy Meld B306 melting furnace, 750 million BTU, 1 phase, S/N1249; Tempco smelting oven and mold sand packing station with tooling, cabinet of ingots with supplies, misc. crucibles, holders & accessories
Diagraph Bradley stencil machine, 1-3/4" letters, 32" tall, w/stand
Shop-built heavy duty rotating engine stand, 48" long x 38" high
OTHER TOOLS & SHOP FIXTURES
(10) Simpson 260 multimeters
(2) Upper & lower tool chests, 8-drawer, 24" wide x 44" tall, on casters
Box assorted tools to include: sockets, wrenches, screwdrivers
Box assorted auto body tools
Shop bench, 60"x26", 34" working height with (2) drawers
(3) 4-drawer wood cabinets, w/metal drawers, 19" wide x 10-1/2" tall, 16" deep, stackable, drawers are 10"x8"x3"
(2) Wood tables, 2'x5'x30"
Wood table, 24"x53"x30", w/metal legs
(2) Dayton 4C855A industrial ceiling fans, 5' w/cages, 3' pedestals
(10) Heavy duty wood desks, 2'x5'x30"
Small bolt bin w/rack, and misc. contents
Steel 6-shelf unit, 92" wide x 6' high x 16" deep
(3) Black metal units w/doors, 7-shelf, 3' wide x 80" high x 16" deep
THIEF RIVER FALLS PUBLIC SCHOOL ISD #564
For information contact Steffes Group,
Eric Gabrielson, 701.238.2570
or Tadd Skaurud, 701.729.3644
The auction has resumed. Please click OK to continue bidding. Sorry for the inconvenience.
The auction has been paused due to technical difficulties and will resume shortly. Please stand by...