TIMED ONLINE

MACHINE SHOP AUCTION

LOCATION:  Thief River Falls High School, 230 Labree Ave. S, Thief River Falls, MN

OPENS:  MONDAY, JUNE 16

CLOSES:  MONDAY, JUNE 23

PREVIEW: By appointment only, Eric Gabrielson of Steffes Group, 701.238.2570 or Tadd Skaurud of Steffes Group, 701.729.3644.

LOADOUT:  Tuesday, June 24, 9:00 AM – 4:00 PM.

MACHINE SHOP EQUIPMENT        

South Bend bench top lathe, through center, 10" bed, 4" swing, with some tooling, 110v, includes stand, "green", S/N8187AN        

Hansvedt EDM 201, 9'x15" work table size, 8" ram travel, 18 gal. work tank capacity, 6"x8" work table travel, with all manuals, S/NAP13836        

Brown & Sharpe 305 Dyna Master vertical mill machine, 3 phase, w/Sony Magnascale LF200 digital readout, cutting fluid, some tooling & 8" vise included, working order, S/N503-25-04        

Vise, 6", for milling machine         

Sheldon Machine Co. EM56P lathe, through centers, 13" swing, 4' bed, 31" between centers, Aloris tool post, one tool holder, 4-jaw chuck w/back gear, 3 phase, S/NEM26413        

Sheldon Machine Co. EXL44R lathe, through center, 10" swing, 44" bed, 21" between centers, Aloris toolpost, 3-jaw chuck, 3 phase, S/N10631D        

LeBlond lathe, through center, 12" swing, 30" between centers, Aloris tool post, Cushman 4-jaw chuck, extra Cushman 836LO 3-jaw chuck, 3/4 hp., 3 phase         

Hardigne DSM 59 tool lathe, through center, 8" swing, 12" between centers, 1 hp., 4-jaw chuck, on stand, 1 hp., 3 phase         

1952 Kearney & Trecker horizontal plane mill, 9" vise, cutting fluid, 5 hp., 3 phase, unknown if in working order, S/N6-6737        

Di-Acro #12 12-head manual punch on stand with misc. dies, S/NBD-2298        

Bridgeport power head, belt drive, with R-8 collett, 3 phase, S/NT2103         

Herman Stone Co granite surface plate, 30"x20" with stand, S/N81038        

Di-Acro H11.01 power tube bender with many dies, 3 phase, working order, S/N000610        

Kalamazoo 18-T-10 Startrite vertical band saw, variable speed, 3 phase, with manuals, S/N46353      

Dividing head, 3-jaw chuck   

Heck #3 trace puncher, 110v, with one die, on stand, S/N31384

Pexto 63F bar folder, 22 ga. cap., working order, has been repaired         

Pexto work table, 8'x40"x32", (3) shelves, no mandrels included    

DSP Monoxivent 712 source capture system with casters, 1 phase, 880 hrs.         

DSP Monoxivent 711 source capture system with casters, 1 phase, 1,346 hrs.         

DSP Monoxivent 687 source capture system with casters, 1 phase, 580 hrs.        

DSP Monoxivent 713 source capture system with casters, 1 phase, 1,077 hrs.         

DSP Monoxivent 710 source capture system with casters, 1 phase, 484 hrs.        

DSP Monoxivent 688 source capture system with casters, 1 phase, 736 hrs.         

WELDERS & WELDING TABLES

Lincoln AC/DC 225-125 arc welder with leads, 1 phase, like new" 10426        

Lincoln AC/DC 250-125 arc welder with leads, 1 phase, on stand, with assorted supplies, S/N306829       

Miller HF Dial Arc tig welder with foot control, tig torch and regulator, 3 phase, S/NJC621950        

Miller HF Dial Arc tig welder with foot control, tig torch, no regulator, on 4-wheel cart, 3 phase         

Miller MPS 20 portable spot welder with foot control, on stand, 3 phase, S/NHE784013        

Tillman welding curtains, one pair         

Shop-built welding table 4'x27", back rest, with bricks         

Shop-built welding table 4'x27", back rest, with some bricks

Shop-built welding table, 36"x70", 29"" working height

GRINDERS

Sioux 645L valve grinder, 1 phase, S/N40302        

Sioux valve seat grinder, with case 

Baldor bench grinder, 10" wheels, 2 hp., on stand, 3 phase         

Boyar-Shultz H612 "surface grinder, Ceramax magnetic vise, 1 hp., 3 phase, S/N23602        

Harig surface grinder, 618w, with B&S magnetic vise, 1 hp., 3 phase, manuals included         

OTHER SHOP EQUIPMENT

Lincoln W93612 hyd. shop press, 40,000 lb., 20" wide x 32" work area, 20 ton jack, 6' tall         

Delta Rockwell 15-655 drill press, 14x11 table, 1/2 Jacobs chuck, Morse taper spindle, 1/2 hp., 110v, in working order, S/N1557913        

Aaseby chop saw, 19-1/2' table, 16" wheel, 10 hp., with Heinrich vise, 3 phase        

Complete sand casting station: includes Speedy Meld B306 melting furnace, 750 million BTU, 1 phase, S/N1249; Tempco smelting oven and mold sand packing station with tooling, cabinet of ingots with supplies, misc. crucibles, holders & accessories         

Diagraph Bradley stencil machine, 1-3/4" letters, 32" tall, w/stand         

Shop-built heavy duty rotating engine stand, 48" long x 38" high         

OTHER TOOLS & SHOP FIXTURES

(10) Simpson 260 multimeters         

(2) Upper & lower tool chests, 8-drawer, 24" wide x 44" tall, on casters         

Box assorted tools to include: sockets, wrenches, screwdrivers         

Box assorted auto body tools         

Shop bench, 60"x26", 34" working height with (2) drawers         

(3) 4-drawer wood cabinets, w/metal drawers, 19" wide x 10-1/2" tall, 16" deep, stackable, drawers are 10"x8"x3"         

(2) Wood tables, 2'x5'x30"         

Wood table, 24"x53"x30", w/metal legs         

(2) Dayton 4C855A industrial ceiling fans, 5' w/cages, 3' pedestals         

(10) Heavy duty wood desks, 2'x5'x30"

Small bolt bin w/rack, and misc. contents          

Steel 6-shelf unit, 92" wide x 6' high x 16" deep         

(3) Black metal units w/doors, 7-shelf, 3' wide x 80" high x 16" deep         

THIEF RIVER FALLS PUBLIC SCHOOL ISD #564

For information contact Steffes Group,
Eric Gabrielson, 701.238.2570

or Tadd Skaurud, 701.729.3644