12 spd. w/quad range, 4 hyd., 6 cyl. Cummins, 330 hp., Degelman 16' dozer blade, blade S/N12109, rear weight package, 20.8-38 Michelin duals, 70% rubber, shows 2,000 hrs., 2nd owner, recent A/C, axle tube, & alternator work, Location: 6144 90th St SW, Morristown, SD 57645, Contact: Mark (701) 522-3450
855 Cummins diesel, 12 spd., 4 hyd., 20.8R38 band duals, New 520/38 outside RR tire, complete New steering column, shows 12,609 hrs., Location: 2500 State Mill Rd, Grand Forks, ND 58201, Contact: Chris at ICS (701) 317-0734 or Representative Dave Krostue (218) 779-6865
powershift, 2 hyd., 3 pt., 540/1000 PTO, 11:00-16 front tires, 18.4-38 rear tires, blown engine, Location: 12241 75th St NE, Edinburg, ND 58227, Contact: Rodney (701) 993-8737 or Representative Dave Krostue (218) 779-6865
loader w/grapple, 8' bucket, came off Case 2094, Location: 12241 75th St NE, Edinburg, ND 58227, Contact: Rodney (701) 993-8737 or Representative Dave Krostue (218) 779-6865
powershift, 3 hyd., 3 pt., 1000 PTO, 14L-16.1 front tires, 20.8R38 rear tires, transmission is stuck, Location: 12241 75th St NE, Edinburg, ND 58227, Contact: Rodney (701) 993-8737 or Representative Dave Krostue (218) 779-6865
open station, wide front, gas, syncro, 2 hyd., 3 pt., 540/1000 PTO, 11L15 front tires, 13.6-38 rear tires, shows 7,560 hrs., Location: 2500 State Mill Rd, Grand Forks, ND 58201, Contact: Chris at ICS (701) 317-0734 or Representative Dave Krostue (218) 779-6865
field cultivator, 60', gauge wheels, tandems across, 3-bar harrow, single pt. depth control, 7" JD knock-ons, a few reinforcement welds, Location: 9063 55th St NE, Crary, ND 58327, Contact: Francis (701) 230-2358 or Representative Dave Krostue (218) 779-6865
harrow, 60', teeth in good condition, missing one section, Location: 1210 162nd Ave SE, Grandin, ND 58038, Contact: Dan (701) 238-0621 or Representative Gregg Holte (218) 790-1705
plow, 6 bottom, 2 pt., some broken plow lays, Location: 1601 N 73rd St, Grand Forks, ND 58201, Contact: Jerry (701) 739-0206 or Representative Dave Krostue (218) 779-6865
drill, 12', 6" spacing, Location: 314 Hill St, Dwight, ND 58075, Contact: Rick (701) 640-2239
self-propelled sprayer, 90' boom, 20" spacing, 1,080 gal. SS tank, 3" fill, foam markers, induction system, adj. width, air ride cab, Raven SmarTrax steering, Raven Viper Pro monitor, AccuBoom, 3,285 hrs., Location: 611 S Logan Ave, Oakland, NE 68045, Contact: Billy (402) 380-3094 or Representative Chris Bair (605) 271-7730
self-propelled sprayer, 90' boom, 20" spacing, 1,200 gal. SS tank, 3" fill, tank rinse system, induction system, adj. width, air ride cab, Outback S2 guidance system, Outback E-Drive TC, 380/90R46 tires, 5,393 hrs., Location: 611 S Logan Ave, Oakland, NE 68045, Contact: Billy (402) 380-3094 or Representative Chris Bair (605) 271-7730
(4) 20.8R38 flotation tires on 10-bolt rims, off of Case-IH sprayer, Location: 2000 Main Ave E, West Fargo, ND 58078, Contact: Representative Tadd Skaurud (701) 729-3644
Location: 611 S Logan Ave, Oakland, NE 68045, Contact: Billy (402) 380-3094 or Representative Chris Bair (605) 271-7730
sprayer, 90' boom, 1,000 gal. tank, Hypro PTO pump, hyd. up/down, height control, foam markers, clean water tank, Location: 441 11th St, Reynolds, ND 58275, Contact: Larry (701) 739-2558, or Representative Dave Krostue: (218) 779-6865
liquid fertilizer side dresser, 24x22", 1,800 gal. tank, hyd. pump, Clymer coulters w/injectors, 320R46 tires & duals, Raven controls, no display, very low acres, Location: 17245 Cty Rd 8, Wahpeton, ND 58075, Contact: Vince (701) 640-3476 or Representative Gregg Holte (218) 790-1705
row crop beet cultivator, 24x22", (2) 250 gal. fertilizer tanks, Hypro pump, side dresser, can be converted back to a row crop cultivator, Location: 6290 200th Ave N, Georgetown, MN 56546, Contact: Tom (701) 793-6300 or Representative Randy Kath (320) 693-9371
band sprayer, 72x22", 750 gal. tank, hyd. pump, truck tires on main, Location: 6290 200th Ave N, Georgetown, MN 56546, Contact: Tom (701) 793-6300 or Representative Randy Kath (320) 693-9371
band sprayer, 36x22", broadcast boom, 500 gal. tank, hyd. pump, 2 pt. w/lift assist, Location: 38177 390th St NW, Stephen, MN 56757, Contact: John (612) 718-6956 or Representative Tadd Skaurud (701) 729-3644
fertilizer spreader, 8 ton, 540 PTO, twin spinner, roll tarp, Location: 6290 200th Ave N, Georgetown, MN 56546, Contact: Tom (701) 793-6300 or Representative Randy Kath (320) 693-9371
ID plate is legible, Location: 2000 Main Ave E, West Fargo, ND 58078, Contact: John (701) 361-9104 or Representative Tadd Skaurud (701) 729-3644
ID plate is legible, Location: 2000 Main Ave E, West Fargo, ND 58078, Contact: John (701) 361-9104 or Representative Tadd Skaurud (701) 729-3644
(1) Dickey John CMS 100 rate monitoring system, (1) Dickey John servo hydraulic flow control valve, Location: 2000 Main Ave E, West Fargo, ND 58078, Contact: Tim (701) 741-2458 or Representative Dave Krostue (218) 779-6865
mower conditioner, 12', hydra swing, rubber roll conditioner, manual & spare parts in shop, Location: 24400 MN Hwy 22 S, Litchfield, MN 55355, Contact: Gaylen (320) 583-6405 or Representative Randy Kath (320) 693-9371
haybine, 16', 540 PTO, twin knife, hyd. swing, rubber crimper rolls, 31x13.5-15 tires, Location: 12924 49th St SE, Enderlin, ND 58027, Contact: Blake (701) 680-2004 or Representative Tadd Skaurud (701) 729-3644
The auction has resumed. Please click OK to continue bidding. Sorry for the inconvenience.
The auction has been paused due to technical difficulties and will resume shortly. Please stand by...